Products: Chemicals: Conventional Negative Plate Chemistry

Subtractive Developer

This negative working developer is used to process Base-line, Agfa, Anitec, Anocoil, CitiPlate, Kodak Polychrome, IBF, Konika Minolta, Creo, Southern Litho and many more OEM plates. Use full strength for developing and replenishing. May be used by hand with a soft sponge or with any negative plate processor. Use with subtractive finisher

Subtractive Finisher

This finisher is used to finish both positive and negative plates from any manufacturer. After developing the plate, thoroughly rinse with water, apply finisher with a clean moist sponge covering the entire surface of the plate, and buff dry using a cotton swab or cloth. The plate may be stored up to 30 days. May also be used with a plate processor. This product is typically used at full strength, but may be diluted up to 30% with tap water.

2 in 1 Developer/Finisher

This negative working developer and finisher is used to process and finish Agfa, Anitec, Anocoil, CitiPlate, Kodak Polychrome, IBF, Konika Minolta, Creo, Southern Litho and many more OEM plates. Using a soft pad or sponge gently spread over the entire plate surface, until all the non-image areas have been remove. Dry the plate thoroughly using a clean cloth until perfectly dry. Do not wash the plate until it goes straight to the press.