Products: Chemicals: Plate Cleaners and Misc. Plate Chemicals

Scratch Remover Desensitizer

For use on all lithographic plates. Clean the plate using a plate cleaner. Thoroughly rinse and damp dry the plate. Apply to the affected area with a clean cloth working it into the affected area as you apply. Completely buff dry vigorously with a clean dry cloth. If completely buffed dry the scratch will never come back. This must be buffed dry to work.

PH Neutralizing Solution

This neutralizing solution was designed for usage in Caustic Developer neutralizing systems such as Metafix and C-pak. Available in NS-4, NS-20, NS-50, and NS-solid. Can also be used manually with mixing buckets. Use pH Hydrion strips when using manually to determine proper neutralization has occurred.

Plate Reconditioner

For the cleaning and reconditioning of all lithographic plates, ideally for scummed plates or for cleaning plates prior to being stored for any length of time. This product will remove ink and scum from the plate surface, returning the plate surface to its original condition. Apply with a clean sponge over the entire plate surface. Wash thoroughly with water and return to press or finish with Preserver Finisher for storage.

Plate Cleaner Preserver Finisher

For cleaning, preserving and finishing all negative and positive working lithographic plates. This is a thick white milky product. Shake the bottle and apply to the plate with a clean damp sponge. Work over the entire surface until it is perfectly clean. Buff dry with a clean cloth making sure there are no visible streaks. The plate can be stored for up to one year.